Haddock

Hi

My side repeater wires have been cut and so I need to fit a new side repeater unit to replace the old one.

I need to remove the  original live wire from the econoseal connector  : how to I do this ?

I suspect there is some simple way that I am missing.

During my build I quickly learned to plan carefully before acting so thanks in advance for your help !

Thanks all. Just got out of the garage and cable secured. Interesting when you hit a brick wall getting over it is greatly helped by advice. 

Cheers again ! 

Thanks will look into new advice and come back and report progress 

Very little probably about 2 to 3 mm I think it’s close 

Hi John and Jim 

Thanks for such helpful response and so quick helps so much when you hit what appears to be a dead end 

Its an S3 so I’m ok on the clevis , no cable ties and handbrake fully down with no tunnel fitted. 

I’ll recheck the adjuster then try the other suggestions and report back. 

Best 

John

Afternoon all,

I am just coming to the latter stages of my 360 R build which I have greatly enjoyed ( the new manual which was published half way through helped !) At the moment  I am having a deal of difficulty hooking the left hand handbrake cable over the hook of the left hand brake calliper. The right hand one was fine. I’d be v grateful for any ideas/ experiences as to how to resolve.

I appreciate any suggestions .