Haddock
-
Posts
31 -
Joined
-
Last visited
Content Type
Profiles
Forums
Blogs
Events
Blatmaps
Speed Championship Results
News
Website Help
Downloads
Gallery
Store
Everything posted by Haddock
-
Hi My side repeater wires have been cut and so I need to fit a new side repeater unit to replace the old one. I need to remove the original live wire from the econoseal connector : how to I do this ? I suspect there is some simple way that I am missing. During my build I quickly learned to plan carefully before acting so thanks in advance for your help !
-
Thanks all. Just got out of the garage and cable secured. Interesting when you hit a brick wall getting over it is greatly helped by advice. Cheers again !
-
Thanks will look into new advice and come back and report progress
-
Very little probably about 2 to 3 mm I think it’s close
-
Hi John and Jim Thanks for such helpful response and so quick helps so much when you hit what appears to be a dead end Its an S3 so I’m ok on the clevis , no cable ties and handbrake fully down with no tunnel fitted. I’ll recheck the adjuster then try the other suggestions and report back. Best John
-
Afternoon all, I am just coming to the latter stages of my 360 R build which I have greatly enjoyed ( the new manual which was published half way through helped !) At the moment I am having a deal of difficulty hooking the left hand handbrake cable over the hook of the left hand brake calliper. The right hand one was fine. I’d be v grateful for any ideas/ experiences as to how to resolve. I appreciate any suggestions .
