Pawson6844

Thanks for the replies. I'm going to give this a go. Hopefully stop the spongy pedal after half a dozen laps. Thanks

Hi Is this too aggressive on rubber seals? lots of people rate this highly but my mechanic has warned against it due to corroding any seals. anyone any experience of this or will it be ok? Do approx 8 track days a year so likely get changed once a year. Thanks

Arggg! Phones had a meltdown. Hopefully someone can delete them all!

Had to tape them up recently. Just flickering in random fashions at random revs. checked all wiring and seems secure. anyone know where to start or what else to look for? Thanks

Thanks

Thanks for this. do you have a part number for the resistor?

Hi, this could be something to do with the ecu. I've just had the premier power upgrade with a new ecu. it was working when I took it down and wasn't when I picked it up. Could be something to do with this?

Yes gap is set and the sensor is reading. He says it's sending a signal to the gauge but the gauge isn't responding

Thought was the wheel sensor, got a new one and still nothing. display lights up but needle doesn't move and miles don't change either. mechanic has checked wiring and confirmed sensor working. Do the gauges fail? Anything else to check. it's a 2014 360R Thanks

I've fitted these. No pictures but my door popper was riveted on. Drilled all them out, fitted the bows and riveted back on including the popper in same location. perfect fit and solid once riveted back on. These are the Caterham ones, came with black rivets too.

You have message

Just passed Pickering. We're at Kirby Misperton

Met at the cafe near Tyndrum. hope you enjoy your trip!

That was us! Just heading home after our nc500 trip. Where we're you heading? Dan

Travelling towards pickering 10.15am