antonio

hello i'm looking for a lower steering column if you have one please send me a message antonio

set of 4 pico/weber 330 CC injectors brand new, never used. supplied by burton power but i decided to get some bigger injectors to suit ethanol use. not to be confused with cheap chinese copies. IWP 043 single stream spray 330 CC Burton are asking £360 for a set, looking for £220 inc delivery to UK

looking for one or a set, any condition (even brake in two pieces) but must be for uprated brake only like this : https://caterhamparts.co.uk/alloy-endplates/6096-race-de-dion-ear-rh-25-deg.html just needed to see if the new front 2 pots calipers would fit at the rear cheers

Sold

hello chaps here i have for sale a 3.92 diff fitted with a tran-X LSD the whole thing has done around 5000 kms and all bearings and seals have been replaced. the diff is a plate type, lightweight preload, with dual ramp block. (will have a look later to tell the ramp angle) more to be found here https://shop.quaife.co.uk/ford-sierra-7 the diff may needs repainting, but keep it mind that red colour always make the car faster... selling it because i needed a 3.62 ratio to suit the ecoboost. of course the diff is noisy, so is the new one i have fitted now! no clonks etc, but a bit of whining as usual. can ship or drop in the sounth of england tran X alone worth £700 without diff. i am looking for £500 for the complete diff. cheers

price drop! £1300 cheers

good morning what are the best options you would consider for the choice of rear brake calipers without hand brake device? i know caterham use AP but they are expensive an need new de dion ears hi spec only make one with hand brake device as far as i can tell from the web site. i would like to keep the std solid disk and hub . i have a uprated master cylinder already fitted. cheers antonio

the whole lot or nothing sir, ! anyway, i'll be ready for a few engines swap!

good morning have a spare 1.6 ecoboost engine from a very low mileage fiesta ST here. no ancillaries but injection and turbo of course. all the missing parts (alternator, starter, sensors can be found for little money on fleabay) i bought it for £700 and it has less than 1000 miles so in very good condition i have a spare 1.6 dry sump system i bought from ford as a used one when they decided to stop selling the formula ford parts. all the above were bought before i got the 3 mountune engines i can sell the whole set for £1500, wich is the price of a titan dry sump... i won't sell the DS system only, sorry best regards antonio

YHBM cheers

for those who might be interested, both caterham and burton sensor are 8 pulses per revolution. the burton's style is a ford part fitted on mondeo/ focus/fiesta you need to buy the sensor boss as well as thread are not the same. straight fit but you have to put the third wire to the earth. much cheaper than the CC parts. cheers

hi jonathan yes, i ran over the sensor...

good morning i need to replace my broken speed sensor but it not available from caterham : https://caterhamparts.co.uk/senders/1008-speed-sensor-gearbox.html?search_query=speed+%2Asensor&results=13 i have spotted this one from burton but i don't know if the specs are similar. this has 3 wires but this can be modified as long as the pulse per revolutions are the same. http://www.burtonpower.com/ford-electronic-speedo-sensor-revfss.html can you help me? maybe someone here has the technical details of the CC part? best regards antonio

good morning i have a 1.6 ecoboost engine for sale here. i bought it from mountune with two other engines last year and it as never been used. engine is new, and probabily one of the best std engine you can find as it was build from selected engines by mountune to be used in formula ford. comes with injections, turbo, and single stage dry sump system. this engine fits perfectly in a S3 but a lot of things need to be modified .i can offer some help if you want to do this conversion, mine is now finished. i'l have a closer look at what i paid for it, but price should be in region of £2700 wich is a good value if you consider the price of a new engine (circa £2000) and a dry sump sytem (£1400 from titan) + it is a "high tolerance" engine designed for race use. please email me if you are interested, engine located in north of france but it will be very easy for me to bring it in UK best regards antonio

i have a shiny one here! give me your email ill send you a picture cheers