mark_w

Ordering some more materials this week so week or two should be ready 

Hello Alan, will look out for you on my travels 

In Upminster parked on driveway Tues 5pm. Not seen before in the area

Thanks Stephen really appreciate your recommendation cheers Mark

got a new batch done now so if of interest please let me know 

My car had a race paddle clutch fitted when I bought it. And they're not something I would recommend for touring or driving in stop start traffic as they are very on or off . 

When my AP clutch and plate started slipping not long (enough) after having it  fitted, I went for the helix plate and cover and has been good so far, mainly chose helix on the findings and recommendations of this thread here

I've had problems with the thin  (brown yellow) alternator wire , lots of heat down there and wire gets brittle and has broken shows those symptoms before becoming a non starter. going to rewire mine now.

Reverie silverstone air box similar to the bernard scouse one here  grp or carbon

these were used on a 2001 car as set of wet weather hill climb wheels  pcd 4 1/4" (108mm)

 2 x 13" x 5.5" 

2 x 13" x 6"

bare aluminium ,  tyres very old and need to go, i can get these removed 

shipping at cost need to check £

£100 

in Essex

any damaged repairable ones out there?

#20  will do, thanks

Overtook me towing horse trailer ..left the M25 at junction 4 I think about 11.30 red black centre stripe KX69 ### anyone on here?

#18  good to hear, i maybe need to just increase the cutout for the weld a little bit in future

All gone for now, but will have some  more in around 3 weeks 

#12 that looks good Rob thanks for posting the pic

#11 :-) good to hear it's arrived safely

#10 yes the handle dia will be ok. pm sent

think its glued on some how, mine took a bit of removing with brute force (mole grips) then scraped / sanded the remaining glue off, the limiting factor on the length is underneath the diameter where the gaitor is it drops away at an angle. measure from there to the front of the grip, see what you've got 

(reply to 5 )Will they fit a metric chassis S3 ?

I think  they should fit all handbrakes but have only fitted to my 2001 imperial chassis, what i will say is if there are any issues I will sort them so your not left without 

That goes for anyone who buys one

Mark

I'm on the look out for an S3 carbon nose cone, prefer unpainted genuine Caterham but will consider whatever is on offer ( damaged , painted, etc ) 

Cheers Mark

Have made a small batch of these while I was making one for myself, they are 30mm dia 120mm long , diagonal style weave, 2 different style anodised aluminium ends with 2x M5 grub screw fixing.

I have tried to simplify  the fitting by machining out a bit of clearance for the weld that is found under the handle once the grip is removed. cost is £60 inc postage,

 is this the one            http://lowflying.lotus7.club/2011/2011_01_08_DrySump.pdf

I have just come across a 2015 calendar if you are interested I will send in the post 

What area are you?

Yes please, thanks for doing another batch...Mark