Andy H Posted February 11, 2005 Share Posted February 11, 2005 2.0Lit Zetec is it best to torque the bolts, then a 1/4 turn, or measure the stretch with a micrometer ? I believe the caps sometimes need reaming out to suit the bolts? Any advice Andy Link to comment Share on other sites More sharing options...
mike.williams1 Posted February 11, 2005 Share Posted February 11, 2005 ANDY WHEN I FITTED ARP BIG END BOLTS I TORQUED THEM UP TO 32LB/FT THIS THE SETTINGS BURTONS GAVE ME WHEN I BOUGHT THEM AND HAVE NEVER HAD ANY PROBLEMS WITH THEM Link to comment Share on other sites More sharing options...
I.Mupferit Posted February 11, 2005 Share Posted February 11, 2005 And yes you do need to ream out the caps. Brent 2.3 DURATEC SV. Gad these things are expensive ❗ Link to comment Share on other sites More sharing options...
Sean-og Posted February 11, 2005 Share Posted February 11, 2005 http://www.arp-bolts.com/pages/tech/images/rod_bolt.pdf Link to comment Share on other sites More sharing options...
Sean-og Posted February 11, 2005 Share Posted February 11, 2005 Another one: http://www.arp-bolts.com/pages/tech/fastener.html Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now