Roger Ford Posted June 6, 2022 Share Posted June 6, 2022 [Got one from FB marketplace].I'm after a standard oil pressure gauge for a Sigm TiVCT engine. I assume it's the same as the fixed-cam Sigma version. Anyone got one knocking around, perhaps after converting to mechanical? Link to comment Share on other sites More sharing options...
K7 VCT Posted June 7, 2022 Share Posted June 7, 2022 Hi Roger yes it's mine. Cheers Julian Link to comment Share on other sites More sharing options...
Roger Ford Posted June 8, 2022 Author Share Posted June 8, 2022 Ah, you're here too! Thanks. In case you're interested (unlikely, I know...) the reason I'm after the sensor as well is that those sensors are intended to measure temperature and pressure, but only the pressure part is connected. My one doesn't work properly for temperature (voltage is way lower than it should be). I'm not sure whether Caterham bought a batch of faulty sensors where the temperature part doesn't work, or whether I was just unlucky. So I thought I'd try another and see if it was the same. It may turn out to be useless, but if not I'm gloing to connect up an auxiliary display controlled by an Arduino to show temp, pressure, ambient temp and time. As fr the gauge, that's much simpler, the threaded mounts have both broken (who makes threaded studs out of plastic, for God's sake?) and it's held on with gaffer tape at the moment. Link to comment Share on other sites More sharing options...
K7 VCT Posted June 9, 2022 Share Posted June 9, 2022 No worries Roger, Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now