Beagler Posted February 1, 2022 Share Posted February 1, 2022 Whats the criteria for adjusting the pushrod. Link to comment Share on other sites More sharing options...
OldAndrewE Posted February 1, 2022 Share Posted February 1, 2022 What is the set-up on your car (photo?). On mine adjusting the pushrods just sets the pedal positions fore and aft Link to comment Share on other sites More sharing options...
Beagler Posted February 1, 2022 Author Share Posted February 1, 2022 Had a feeling it was just pedal height but wanted to make sure. Have fitted uprated Master Cyl. Link to comment Share on other sites More sharing options...
OldAndrewE Posted February 1, 2022 Share Posted February 1, 2022 Correct so just adjust until the pedal is in the correct place. I presume you will need to adjust the brake light switch as well (mine is hydraulic) Link to comment Share on other sites More sharing options...
Beagler Posted February 1, 2022 Author Share Posted February 1, 2022 Thanks Andrew. Link to comment Share on other sites More sharing options...
ChrisC Posted February 2, 2022 Share Posted February 2, 2022 Careful when you adjust the brake pedal, the switch won't last long if you position it so it's just making contact. Make sure it's fully off when the pedal is at rest. Not that they last that long at the best of times, but there is no need to accelerate its failure. Link to comment Share on other sites More sharing options...
Beagler Posted February 2, 2022 Author Share Posted February 2, 2022 Its in the same place as previous m/cyl pushrod so no different. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now