Leadership Team andy3.skinner Posted July 26, 2021 Leadership Team Share Posted July 26, 2021 Doing a refresh on my K series R500, I need a set of piston rings but struggling to find out what Minister fitted. Can anyone advise ?thanks Andy Link to comment Share on other sites More sharing options...
simon_h Posted July 26, 2021 Share Posted July 26, 2021 If they are Cosworth pistons then I guess you have enquired there? It’s probably a standard Cosworth ring pack of the relevant bore size? Link to comment Share on other sites More sharing options...
Area Representative Nick Bassett Posted July 26, 2021 Area Representative Share Posted July 26, 2021 I would ask DVA Power (Dave Andrews) - he's bound to know. Link to comment Share on other sites More sharing options...
Leadership Team andy3.skinner Posted July 26, 2021 Author Leadership Team Share Posted July 26, 2021 Pistons were supplied without rings from Cosworth so unlikely these were designed to take Cosworth rings. CC are suggesting std K-series rings 1.0,1.2,2mm (which I can check) but haven't found K-series ring widths yet . Link to comment Share on other sites More sharing options...
oilyhands Posted July 28, 2021 Share Posted July 28, 2021 FYI, the stock K series rings don't fit. A ring pack is on it's way to Andy.Oily Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now