AnkerB-S Posted June 10, 2020 Share Posted June 10, 2020 Today's mystery is that my clutch slave cylinder can move back and forth about 1/4", which robs the pedal of some of its travel. It has a cylindrical part that fits through a hole in a bracket, and this is where the longitudinal play occurs. I can't figure out how it is secured in this hole and what prevents more play than it has.So the specific questions are: Is it really supposed to have this play? If not, how and where do I eliminate it?Thanks in advance/Anker Link to comment Share on other sites More sharing options...
elie boone Posted June 11, 2020 Share Posted June 11, 2020 Can't you post a pic ? the spindle of mine goes trough the same hole as would the cable, and has no eccesive play. Link to comment Share on other sites More sharing options...
AnkerB-S Posted June 11, 2020 Author Share Posted June 11, 2020 I will. Maybe tomorrow. It takes some effort to get there. Rear on jack stands, boot off the actuator, picture and then the reverse.Thanks/Anker Link to comment Share on other sites More sharing options...
AnkerB-S Posted June 12, 2020 Author Share Posted June 12, 2020 I got the answer.The hydraulic slave cylinder pulls instead put pushing, which is the norm. So it is possible to adjust the play with the threaded nuts on the actuator rod. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now