Polarn Jerry Can Pump

[Mark Durrant]

The Polarn Pump is very easy to use, simply connect it to your jerry can, pump the piston to create flow and fill your tank. There is an built in air bleed to stop the flow.

A 20 litre fuel can will empty in less than 35 seconds at full flow but this can be modulated by simply pumping the piston less. Ideal for track days and fits baylent type jerry cans (see photo).

Used and in good condition. £25 Sold        

Collect from Horsham or carriage at cost.

[Notsohotcams140]

Hi Mark, 

Ill take if you've still got it.

Can you bring it to Harewood, it'll pay for your curry.

James

[Mark Durrant]

James

I will bring the pump to Harewood.

Mark

[Cookie Monster]

Hi Mark

Just got one of these and it spits fuel out of the screw/breather on the pipe. Any ideas of how to eradicate this?

[Mark Durrant]

Phil

I have not experienced this problem but it sounds like the valve is not seating properly try pressing open the valve, blowing compressed air to clear any debris and try again.

[Cookie Monster]

Thanks Mark

I'll put my glasses on and have a look!

[Cookie Monster]

Now sorted and apologies for the hijack