johnpbransfield Posted June 22, 2015 Share Posted June 22, 2015 Sigma 150 with 6 speed box and hydraulic clutch.Is it possible to adjust the hydraulic clutch?If yes, is there a sequence ? Link to comment Share on other sites More sharing options...
DJ. Posted June 22, 2015 Share Posted June 22, 2015 No, the master cylinder and slave should be matched for movement. Clutch wear will just mean the biting point is higher up. The only adjustment is for the clutch pedal stop.If you find the clutch stops releasing properly with the pedal fully depressed it means the hydraulic system is starting to fail, if your lucky it might be the master, if not it's an engine out job How do I know this..........Duncan Link to comment Share on other sites More sharing options...
Support Team Shaun_E Posted June 23, 2015 Support Team Share Posted June 23, 2015 You can't adjust the clutch itself as above, but you can adjust the pedal. There should be a threaded rod into the master cylinder, just like the brake so you can adjust where the pedals sits. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now