Wheel specification for BJ Minno?

[A10ROX]

I need to replace the tyres on my Minno

Other than I know they are 145R10C are they 4", 5.5" or 100mm PCD?

 

Just realised BJ no longer do the Minno or parts for it ...

 

 

[Mark Durrant]

What are you looking to replace?

 

If the tyres then go for an 8 ply trailer tyre, more expensive but do not suffer blow outs like the mini tyres do at 60mph

 

If you need to replace the wheels then contact Brian James as they still supply well did last time I needed one

[Mark Durrant]

BJT describe the wheel as 10" 100pcd

[oldbutnotslow]

I use these people. Trailertek

Good on price an delivery

I use 8 ply on my PRG

[A10ROX]

Guys .. Many thanks

For the cost of wheels & tyres I was going to replace both ...

So 100 PCD it is ...

[sopris]

It was a pet peeve of mine that the Minno's load capacity was exactly 4 times that of the standard 4 ply tyres meaning there was no reserve in the tyres as far as load went. My thoughts would be to fit 8 ply tyres or plan on replacing them as part of preventative maintenance every 4-5 years.

[Roger Ford]

I use Mini tyres. Lower load rating than 8-ply, but much higher speed rating (think the 8-ply are only rated to 82mph). Not had any problems which weren't caused by mechanical damage.