K Series Cam Sensor Plug Coding

[revilla]

Could anyone with a K Series (non-VVC) do me a quick favour please ...

 

I'd like to check the plug coding (the pattern of notches that acts like a key to ensure the plug only fits the correct socket) for the 3-pin camshaft position sensor. I think this was fitted to non-VVC K Series models. It's only the cam sensor with 3 pins I'm interested in, not the 2-pin one fitted to the VVC. The plug looks like this:

 

http://revilla.dyndns.org/Public/CamSensorPlugCoding.jpg

 

If you press the little release spring bar inwards and unplug the plug, on the front face it will say "Code I", "Code II", "Code III" or possibly "Code IV" (as shown in the picture above). If anyone could tell me for sure what it says I would be most grateful.

 

Thanks.

[gundersen]

This one? Its from a 2002 EU3 140bhp X-Power.

[revilla]

Thanks that looks like the one ... but I can't quite read what it says in the bottom left hand corner of the plug in that photograph ... does it say "Code II"?

[gundersen]

If I magnify it, it looks reads "Cod" on the left side, The right side looks like a square with a line through it, so it could read as III.