Ged Posted September 29, 2010 Share Posted September 29, 2010 After having two plastic hose connectors and a plastic bleed tee fail in the last couple of months. I have been trying to come up with a better alternative. First I had some heater hoses made up in silicon here and changed the hose connector to stainless (these hoses are for the rare Clayton heater only used for a short period around 96). After much searching and phone calls I found an alloy hose adapter in the right size (16mm) to fit as a bleed/ top up point here it's a bit bulkier and heavier than than the plastic bleed tee's, but hopefully will give me some piece of mind. Link to comment Share on other sites More sharing options...
Mr Locust Posted September 29, 2010 Share Posted September 29, 2010 Minor replumbing can make the system self bleeding. Ian Green and Silver Roadsport 😬 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now