athens7 Posted December 22, 2009 Share Posted December 22, 2009 There seems to be no Samco hose kit for a Caterham with a Zetec motor. Has anyone installed Samco hoses on a Zetec 7 (especially an st170 Zetec), and if so, which part numbers? I have a triple pass Caterham ali radiator, btw. Brad 2005 SV SVT Zetec Link to comment Share on other sites More sharing options...
Paul Formston Posted December 22, 2009 Share Posted December 22, 2009 Hi athens I got most of mine from Raceline and the one's I couldn't get I use K series one and cut them to fit Regards Paul Link to comment Share on other sites More sharing options...
Guy Lowe Posted December 22, 2009 Share Posted December 22, 2009 Try RACELINE but you probably won't require the aluminium water hose pipe. Guy Now with ZETEC power HERE Link to comment Share on other sites More sharing options...
Doug Posted December 22, 2009 Share Posted December 22, 2009 Yes, I got mine from Raceline too 'Have you any idea what it's like to have the wind rushing through your hair!' (Quote:Sq Cdr the Lord Flashheart) Link to comment Share on other sites More sharing options...
duffym Posted December 22, 2009 Share Posted December 22, 2009 As said above I used the Raceline kit. I dont have aheater so didnt need anything more than the kit contains except for 2 blanking plugs for the water rail ans ally pipe which runs behind the radiator. Link to comment Share on other sites More sharing options...
philwaters Posted December 22, 2009 Share Posted December 22, 2009 Pic of the Raceline kit here (metal pipe runs along under the radiator). Normal colour is Blue - but I like to be awkward Phil Waters Link to comment Share on other sites More sharing options...
athens7 Posted December 27, 2009 Author Share Posted December 27, 2009 The Zetec kit pictured doesn't look anything like the hoses I need. Two of the three necessary hoses are stock Samco race hose pieces, and the third looks to be build-able from 2 90 degree elbows and an alloy connector. Merlin Motorsports had the pieces I needed in stock, unlike the US distributors. The trick with my installation is that two of the three hoses are 32mm on one end and 35mm on the other. The original hoses were 35mm on both ends, crimped down to fit the 32mm 3 pass ali radiator outlets, which, unsurprisingly, is where they are leaking. Thank goodness for reducer elbows! Brad 2005 SV SVT Zetec Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now