Question on mid 90's injection loom

[Anthony]

Afternoon everyone,

 

I am helping a friend with a re-wire and picked up new loom from Caterham this morning (it was the last one and without a bag so we think its a mid 90's injection loom).

 

In preparing the loom we will take out all the elements we do not need i.e. reversing lights, rear number plate light, wiper switch/power, washer switch etc etc.

 

Most of the loom is fine...but there is a new connector which is different to existing loom. It has 5 connections in a strip, but only 3 are used, and one is a thick yellow cable. It goes to the back of the car and is not lighting/indicators/fog/brakes/reverse. Is there a similar connector i.e. 5 pin strip for new types of pump ?

 

Any help would be most welcome.

 

Anthony