pjh Posted December 4, 2007 Share Posted December 4, 2007 Can anyone tell me the PCD for a Brian James Minno trailer - is it 4" or 100mm ? If anyone has the full specification (i.e. axle, brakes etc) and could email it to me I would be really grateful. I need to sort out some new wheels and tyres and can't easily access the trailer. Many Thanks, Peter PS And yes I have asked Brian James, who weren't that helpful. Link to comment Share on other sites More sharing options...
Sheds Moderator Posted December 4, 2007 Share Posted December 4, 2007 Bear in mind trailer wheels are heavier spec than car wheels. Link to comment Share on other sites More sharing options...
Mark Durrant Posted December 4, 2007 Share Posted December 4, 2007 It depends on the age of your trailer so the safest way is to measure it Mark D Comp Sec Link to comment Share on other sites More sharing options...
Paul Deslandes Posted December 4, 2007 Share Posted December 4, 2007 Pater blatmail me with your email address and I'll send you what I have. The 10 inch wheels are 5.5in pcd. They have VLUKON 3.50BX10H2 stamped on them and the tyres are 145R10 68S. See here I've got the Avonride service manual and the Brian James spec sheet for further info. Paul Link to comment Share on other sites More sharing options...
Mark Durrant Posted December 4, 2007 Share Posted December 4, 2007 Perhaps I should have made my first post clearer. There are two different PCD's for the 10 inch wheels so you need to measure to make sure you get the right wheels Mark D Comp Sec Link to comment Share on other sites More sharing options...
pjh Posted December 4, 2007 Author Share Posted December 4, 2007 Paul, Many thanks, I have blatmailed you with my details. Mark, I realise that they are different and my trailer is about 7 years old. Unfortunately me and my trailer are not in the same part of the country - hence need the power of blatchat Many thanks, Peter Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now