Jan T Posted April 9, 2002 Share Posted April 9, 2002 Blatchatter friend of mine has a few problems (incl. not being able to access blatchat) with his 1700 Xflow it seems he can't get it into any forward gears. Does any one know of a 7 friendly garage who will come out to see him and take a look? He is based 5 miles from Andover. cheers Jan PS Sorry meant to put this on chit chat ! Edited by - Jan T on 9 Apr 2002 07:16:30 Link to comment Share on other sites More sharing options...
Andrew Russell Posted April 9, 2002 Share Posted April 9, 2002 If his car has been layed up for a while, the clutch plate may have stuck to the flywheel. This would prevent the selection of gears once the engine was running. Can he select them with engine stopped? Only a thought. There have been previous postings about this and ways to overcome it. Andrew Link to comment Share on other sites More sharing options...
dvhea11 Posted April 10, 2002 Share Posted April 10, 2002 hiya, there is a chap over @ thruxton circuit (sorry, can't remember the name but if you contact the circuit they will know) M Link to comment Share on other sites More sharing options...
peterg Posted April 10, 2002 Share Posted April 10, 2002 Ray West Engineering is the guy at Thruxton - and very good he is too from what I hear.... It's still not fast enough! Link to comment Share on other sites More sharing options...
Jan T Posted April 10, 2002 Author Share Posted April 10, 2002 Thanks I will pass this info to my chum. Jan Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now