Foxy Smith Posted February 20, 2002 Share Posted February 20, 2002 I've traced a non-functioning reversing light to the fact that the connector to the gearbox switch has come adrift. Peering through the small gap in the tranny tunnel I can't see a lot. Can someone please give me a clue as to where the connector plugs in. '92 HPC/BGH Rocket gearbox (but believe this is still the standard 5sp 'box casing). Ta Foxy Link to comment Share on other sites More sharing options...
R2D2 Posted February 20, 2002 Share Posted February 20, 2002 Rear of the tailshaft on the nearside about on the centreline, from memory Link to comment Share on other sites More sharing options...
EFA Posted February 20, 2002 Share Posted February 20, 2002 Its on the offside near drivers left knee. To access it either remove the tunnel top 9if you havce a padded tunnel top) or remove the ally panel around the gear knob (secured by 4 screws, two on each side of the front of the tunnel) The connector is a very simple snap in connection like a PP3 battery, and they do work loose. You may need to squeeze the gearbox switch half very very slightly, in order to get the connector to remain in place. Fat Arn The NOW PROVEN R500 Eaterid=red> See the Lotus Seven Club 4 Counties Area Website hereid=green> Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now