Tight fart Posted February 14, 2002 Share Posted February 14, 2002 As in my earlier post I was asked, how I had fixed the screens without the ali strip. I have now put some pics on my web site for all to see. it enables you to take the screens to trackdays etc and change over there. clickhere T.F@O.F Edited by - tight fart on 14 Feb 2002 18:44:26 Link to comment Share on other sites More sharing options...
frank martin Posted February 15, 2002 Share Posted February 15, 2002 Can I ask what have you done with the ali strip ? if it is surplus to requirement perhaps we could arange a deal thanks Link to comment Share on other sites More sharing options...
Tight fart Posted February 16, 2002 Author Share Posted February 16, 2002 It went back to caterham as it was usless. Link to comment Share on other sites More sharing options...
CHRIS CLARK Posted February 17, 2002 Share Posted February 17, 2002 Looks like a good way round the 'old' problem!!!thumbsup.gif Link to comment Share on other sites More sharing options...
tony isherwood Posted February 18, 2002 Share Posted February 18, 2002 What (if any ?) reinforcement did you put underneath the fixings ? Or is the ali in the scuttle section strong enough to hold the screens without deforming the scuttle ? Link to comment Share on other sites More sharing options...
Tight fart Posted February 18, 2002 Author Share Posted February 18, 2002 the centre 2 fixing points went through the ali and into a steel bar that must run under the scuttle. The outer 2 I put large washers underneath and bolted through. they have done many track days and a good few races with no problems. T.F@O.F Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now