Wisamic LED headlight wiring

[BenF]

Hello

I bought Wisamic LED headlights, with the halo LED light, which I want to use as the sidelight.

The connector for the main headlight is a straightforward plug in, see the green connector above.  Easy.

To get the halo LEDs to work, as per Wrightpayne's advice on another thread, presumably I should just I just cut off the sidelight connector, remove the sidelight earth wire and then connect the positive sidelight wire to the looped wire on the Wisamic unit.  Is that right?

Regards Ben

[BenF]

Actually just noticed this post from SM25T on the same subject

Plug lead into H4 headlamp socket but wrap some insulation around it to cover all parts of contacts. Need to join sidelight wire to Halo ring wire .... easy enough

Will try this....

[SM25T]

Sidelight wire is connected to one of the cables, not the loop. It was detailed in the instructions. Without removing headlight unit, I can't remember.

[BenF]

HI Ian thanks

In my instructions, this was not mentioned.  I think the model I bought (same as dan sigma 140) is slightly different to yours.

In any case, one of the sidelights is currently not working (even with a conventional setup), so I need to sort that problem first before doing the LED conversion.

Ben