Pendennis Posted January 3, 2013 Share Posted January 3, 2013 Does anyone know what the dimensions are of the standard type cycle wing brackets, race version to suit 13" wheel? Suppose dimension from back of stub axle to centre of 90 degree bend on top arms is all I need to know. Many thanks Ian Link to comment Share on other sites More sharing options...
SV Gary Posted January 3, 2013 Share Posted January 3, 2013 The distance from the centre of the monting boss to the centre of the wing support tube is 12 1/4" or 311mm Link to comment Share on other sites More sharing options...
Pendennis Posted January 3, 2013 Author Share Posted January 3, 2013 Thanks Gary, is that centre of bend and how does that compare to non race type? Link to comment Share on other sites More sharing options...
SV Gary Posted January 3, 2013 Share Posted January 3, 2013 The sizes I have given are for a standard 13" wingstay and are from the centre of the mounting boss to the centre of the tube - not the centre of the tube arc. Link to comment Share on other sites More sharing options...
Pendennis Posted January 3, 2013 Author Share Posted January 3, 2013 Blimey, what on earth have I got Based upon your description mine are 340mm, did Arch fabricate different stays for different wheels? Link to comment Share on other sites More sharing options...
Wrightpayne Posted January 3, 2013 Share Posted January 3, 2013 I think there are three Race wing stay Std 13"/14" wheels HPC 16" wheels I have the std 13/14 version and it's roughly 340 from wheel centre to tube centre. Difficult to be 100% accurate as wings on Ian Link to comment Share on other sites More sharing options...
Pendennis Posted January 3, 2013 Author Share Posted January 3, 2013 Hi Ian, same as mine then. Caterham online store list three versions as you say. Not sure what stays Gary has got though, but looks like a new-ish set is up for sale soon then 😬 Link to comment Share on other sites More sharing options...
Pendennis Posted January 4, 2013 Author Share Posted January 4, 2013 Today my second set of stays has returned from the powder coating, these are 320mm from stub axle centre to top of forward stay, they also have a flat vertical section before it sets across at 45 degrees, these must be the 13" race stays. The others must be standard as Ian states. Cheers Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now