Dutchy

Is this for an imperial chassis? 

I'm in need of a handbrake assembly and cables for the tunnel mounted handbrake S3.

Thanks

Steve 

Hi,

I need one Mike Barnby centre, as long as it's straight and not cracked. 
 

cheers

Yes please, could I have a set please! 

Tony, you have a pm! 

Hi,

im looking for a full set of anthracites 6&8 inch.

If they need re powder coating no problem!

cheers

steve 

Im looking for a pair of mobile chassis stands, so I can build a new car I'm working on. Ideally something like the ones from Machine Mart, with wheels on, so I can move it around in my garage. 

https://www.machinemart.co.uk/p/12901-sealey-vmd001-vehicle-moving-d/

Cheers

Steve

I have got a tatty minilight that is no good for road use. 

I'm refurbing some MB wheels and need 4 inners to make wider rear wheels.

if there are any unwanted 6" inners, please let me know.

Thanks

Yes, thought about that! But if I can upgrade it to a minno max, it's easier! 

I have to sell my Brian James Minno as I can no longer fit my 7 on it with 10inch rears and 250 tyres.

I have recently replaced the decking and it also has a high level tyre rack. 
 

Based in Portsmouth, but could meet up or perhaps drop off on my travels.

looking for £1100

pm me for photos! 
cheers

Steve

Will you be at Gurston in the leaders championship? 

Hi Mark,  Would be great if you have.

Im looking for the following inner and outers for MB Split rims

3 inch outer x2

2.5 inch outer x1

5 inch inner x1

Just need to be straight, I’m not worried if they are scruffy!

thanks

Steve

yhm, ref. 2 fronts!

Steve

Sold! 

Price reduced!

Bttt!

I have a Powerspeed exhaust can with catalytic converter, suitable for a K series or similar near side exit system.This will accept a 2 1/4 inch collector (primaries,collector not included). The exhaust can is 66cm long, 7 inches diameter and mounts on the normal position by the rear wing.  

The Powerspeed exhaust can also comes with an interchangeable rear exit system with additional can under the fuel tank. 

I had this exhaust can modified to enable the normal exhaust can to have 2 end fittings. one with a normal tail by the rear wing and another with tubing going to an additional rear silencer.

On my engine the complete system had a noise test at mid 80's db. Ideal for track days. 

Contact me for photos/ details

reduced to  - £350 ono

Thanks

Steve

Clearing out the garage!

CSR Wing Stays - brand new, one still in plastic, the other new out of plastic (never used with one or 2 marks) - £90 pair

Nitron Springs (used not immaculate) - 2x 250lb, 2x150lb - £30 (all of them) - Sold

Ferrodo DS3000 front pads(4 pot calipers) used but hardly worn -£10  

Bonnet (Orange, used with cut out) from a 98 SLR -  £30 (sold)

Postage & Packaging extra or collection

Thanks

Steve

I would say a proper refurb, I'm no expert in what is needed but I will send photos.

I have a set of 4, 6 inch, 8 spoke, very scruffy anthracites taking space in my garage!

They would be ok for a racer or a complete refurb!

I have thought about getting them sorted myself but!!!!!

£100 for the set!

I can send pictures if needed, they are flaking paint etc!

Collection from South coast or postage extra! 

Does anyone have one from an old project they no longer want?