RICHCAT7

Out for sunday bike ride  saw 3  sevens led by red white and blue limited edition seven ,followed by two green   ( I think)

I waved but dont know why ! you wouldnt have known i was a sevener !

Wanted to take the bike back and get seven out !

Looks like you were enjoying a blow !

Hello Richard,

Havent done any for ages but have a set i am sure if anyone interested be glad to move them on for £30

Regards Richard

Hi Brum brum,

I may have a couple of sets left will have a look, If you could measure the maximum length and width of both side it will help as there are different sizes.

Regards Richard

Rj 

You have been mailed

Richard

what works for me is ,

Crank over for about 5 to 7 seconds without touching throttle to get fuel up,  then rest  ,then 4 or 5 pumps  crank again and when it fires,  i catch it on the throttle .

Hope this helps

plugs BP6ES i think.

Thanks for replies ,

main use is  steady progress on roads ,

loved the a021s but not allowed now !

so hot favorites are continental eco 3    ,  khumo v70  ,  of maybe uniroyal rain experts,

Dont think there is any more choice really than them !

I know they are Black n Round but i need some direction due to lack of choice in my 185/70/13 size

Any pointers will be greatly appreciated

That will be me then stridey ! with the bath plug under my brake pedal !

very nice inflation of trouser leg at about 60mph 

Nice while touring in france !

well worth doing this mod

used 50 mm air duct hose similar to carb heat piping in light aircraft

cable tied to  front right hand side chassis tube running along past oil filter to back of pedal box where your 2 inch pop waste is fitted.

Richard 

A shot in the dark but anyone got one for sale ?

Refer Page 37 and 38 for Grill pictures if anyone interested in purchasing,still have all models.

quote;

Bought one of these from Richard.

its beautifully made and a work of art.

well pleased with it.

not many left now , get the last off !

i still have all types.

£60 inc recorded post , and ti freeby 'bottle opener dzus fastener'

Thankyou all for your assistance,

will tackle bennets this weekend !, should be interesting 

Hi looking to replace my alternator ,but think it has wrong one fitted to my 1990 crossflow 

only 29 amps ?

should it be a 55a ?

Hope someone out there knows ?

Richcat7

Hi Alan  and Tonmawrie,

im back in the room !

you have been blatmailed !

Hi Alan have messaged you too !

Damdy cash you need to contact me again somehow as your message box is full and i cant contact you,

i do still have some available and can send to anwhere you like

Regards Richard. 

Hi Martin,

Just thought i would share my similar experience.

Car starts and ran fine until 10 minuits up road and squeezing the loud pedal a bit hard i found at about a constant  80mph   it  did a sudden ignition cut for a mere second ,    i would back off and the car would seem fine.

Had a long french trip looming so changed plugs  and cleaned jets.To try and sort.

Car then repeated the same problem , so a trip to Peter Baldwin at Wilshers Garage Royston revealed the same issue on rollers.

We stripped off the Dizzy cap (Aldon Ignitor) and found loads of carbon type dust in there,gave it a thorough wash out , it apparently causes tracking at high revs. 

Replaced everything and all is fine now 2000 miles later.

I also had a problem when blipping throttle at low revs engine trying to cut, all it was i found the spark plug gaps were worn way too big (about 1mm)causing week spark

New plugs gapped sorted this out ,and i can now sit and blip throttle  

Hope this is of some help.

Richard.

Spotted today by fellow sevener without his car 

I left you a Titanium seven bottle opener dsus fastener tool in your car,

hope you found it.

Was a great day, and amazing place..

Rich Ti

Hi Ian,

Oh yes i got it  !

so did my Hermes !

cheers ian

Hi craig , not sure whats going on wiv blatmails  did you get my message ?

Hi Craig,

Thanks for your interest in one of my grills

Here are some sizes for you to check if you decide to proceed,

As you look at the front of the Grill where the right hand side pegs are,can you take a measurement from the base of the top peg,
 to the base of the lower peg ( where it meets the perimeter of the grill).
The   measurement should be 205 mm on the later Grill    (post 2010), and 210 mm on the early one  (pre 2010)

Thanks for your interest,

Regards Richard

Hi Neil,

Will sort you one out tomorrow

Regards Richard

Hi Mr P,

All dropped off today, please let me know when it arrives, also keep a lookout for the free bottle openers and dsus fastener undoer !

Regards Richard

Hi Mr P

is it 240mm x 445 longest length, both sides same,

that is my largest one,(i think).

Regards Richard

Hi Mr P,

Sorry for the delay in replying.

Can you give me a measurement of the longest length dimension of your guards please.

If you could also check the width please,

Im sure i have a pair for you.

Regards Richard.

Thanks Richard for the Pics uploaded, 

Really looks   the mutts !

oops can i say things like that on here !!

Enjoy 

Richard.

Just bought a new one from Thundersports (oxted )

very nice too.