rynicolson

thanks Nick. Email recieved and we are talking! R

New and never used. Still in packaging. I can't remember what car they were bought for, definitely good for a 1.4 K series - possibly for a 1.6? Or were they for my 1.6 CVH...? Don't remember but available. Make me an offer. Thanks Richard

I have a battery cradle / house (for a Banner type battery).  With goal post arch and closed cell foam base. In good condition and if you are a polisher will come up wonderfully once polished. Can send photos. Call or email me as not often here nowadays. Thanks Richard M: 07584 250203 E: richardnicolson2hotmail.com

end photos

Has anyone got a spare one lying around they don't want / need?

TIA

Richard

 Brantz 2S rally meter. £195.

Has the remote reset button and power cable. New these are c. £300.

The International 2S Pro tripmeter has all the features of the International 2 Pro PLUS a third read-out showing either Current Speed or Average Speed. The Average Speed can be recalculated at any time, even on the move.
Triple Displays (Red LEDs ~ 15mm high)
- Total Distance
- Intermediate Distance
- Current Speed or Average Speed
Calibrated easily via push-wheel switches on the front of the unit
999.9 Maximum Total Distance (with adjustable decimal point: 00.00 or 000.0)
99.99 Maximum Intermediate Distance
999 Maximum Vehicle Speed / 99.9 Maximum Average Speed Display
Remote Zero Unit to operate the Intermediate Display - INCLUDED
Can be calibrated to read in Miles or Kilometers
Zero, Forward, Reverse and Freeze Buttons on the front face of the Meter. Plus a Stepper Knob - for manually increasing or decreasing the total distance travelled in case of corrections.
Suitable for BOTH Negative and Positive earthed vehicles.
Dimensions: 120 (140 inc mounting flanges) x 100 x 45
Supplied with: 1.2m Power Cable & 1.8m Sensor Cable
Will require a sensor (c.£30 from Brantz and power socket (or hard wire existing power cable into your vehicle).

I have the above available. recently polished ;-) and has a foam base for the battery to rest in. Over bar and nuts / washers / bolts. Open to offers. Can send photos.

I have a used K series XP air filter - small cracked off area to the joint, happy to send photos. Will need cleaned, as has done c. 13k miles. FOC aside posting costs before it is trashed. 

Can anyone advise what the spark plugs recommended for a 1.6 Supersport K series are? Have found a set of Bosch Super 4 FR78 509's whilst de-cluttering and can't remember which car they were for! Thanks in advance.

thanks Stu, fortunately my local marine fabricator who is excellent crafting special pieces for me on yachts recently bought a Caterham - we now get little marine work when I'm there as a result - might get him to build be a "single" piece channel along the same concept. Thanks again. Richard

Just to confirm that the recommendation from James B is spot on... 10 for the price most are charging for 1 or 2. Perfect match and fit. 

Thanks guys. I’m reluctant to relocate in front of heater for a number of reasons (Angus Davidson for one who is currently building my model)... Stu might follow your route. I was about to build a ,’secondary’ battery box floor to ease removal and fitting but your route does this - you don’t have a pic of the box spacers you are using do you? Thanks 

I upgraded from a big Banner to a small Odyssey - and bought an alloy bracket to fit forward of the ECU on the LHS foot well top side  - where the standard CC banner would normally sit. However the new bracket whilst fits - is snug under the chassis rails and engine bay diagonal - also once fitted it does not allow the battery removal due to the "lip" around the bracket (yes I can cut / grind this off). I would be interested to know how and how others have installed such a bracket. thanks Richard

James thank you... 10 for the price some are charging for 1 or 2 and including P&P! Fingers crossed but many thanks!

Mine are now perished and past their best. I have searched online for these... and they vary £1.30-£1.90 each... which I can live with (sort of)... but then postage is c. £10! Anyone know of a supplier who doesn't take the p1ss on shipping? Also, mine are 2001, are all AP calipers using the same as I can't see online an exact match but many close. Thanks Richard 

Price not £250 = price @ £200 

This is the perfect wall storage unit. Used by F1 Motor race Teams, Specialist engineers etc. I m still (after c.20 years!!!) trying to work out how to post images - if you are interested I can send photos!

43.5 cm wide

183.0 cm length (drop)

4 x small box units

9 x med box units

4 x ML box units

2 x L box units

£200

A pair of rear light clusters (lens, blocks, cable etc). Good condition. Lens are new. For sale following carbon / clear lens change.

No grommets to cables but these are easily sourced for a few pence each.

Caterham out of stock

£40 the pair incl P&P

A number of club members have this - as a result of me supplying when I was in the business. Coba the company who bought the product business from me is selling through Screwfix at £40/m2. 

I have c.15.6 m2 - more than enough for a single garage as some of mine has never been out of the box. Coba price c.£624!

The interlocking tiles have hidden interlocking seams, the tiles are in Silver, BUT most tiles need a clean (jet wash!) or if asking price met I will do this before collection (Isle of Wight) or delivery Southampton to London with negotiation if you're not in a rush.

Asking £285 ono

I can send photos laid and as stacked in piles currently.

Pair of rear light lens in red/orange. With drain holes to underside. Used but in good condition. Also have a pair of mounting blocks (rubber style) - New unused. Offers.

Thanks David - comments noted! I'm holding off starting until blocks arrive so its all done in one stage but your comments most useful. Thanks

Thanks all - I ordered from Carbon Classics so will wait and see. David thanks for the comments re-beading / sealing lens. I was never expecting to get them until 2020! Richard

I'm looking to add carbon rear light blocks to my LED's when I fit them (which have been sitting on the shelf for 2 years!)... aside Classic Carbon does anyone else make them? Looking for recommendations / thoughts. Or are Classic Carbon only option. Will probably do rear fog and reversing lights at the same time.... call it a Christmas present to myself! Thanks Richard

johnV... is this still available? Richard

Depends on SV wheels... always going to be tight!