Nick Pargiter

I have an iPhone SE 2020 64GB that I'm selling. PM if interested.

I'll take the set of orange CXR's. PM sent.

Regards

Nick

2x Large please

Advert for non member so please contact him directly.

I have surplus to requirements a number of K series service parts. 

Bought as part of a job lot of Caterham bits and pieces and of no use to me as I have a Vx HPC… 

Facet Distributor Cap for K – new boxed 

Facet Rotor arm – new boxed 

Rover Throttle Position sensor JZX3491 – new clean but no box 

Rover Crank Sensor 3VRS 1304 NSC100760 42728A – new clean but no box 

SKF clutch release bearing VKC 2144 (for ford arm in Caterham) – new boxed 

Set of 4 out of 5 HT leads (coil and cylinders 2-4) – new no box 

Set MINTEX Racing MGB533 M1144 rear pads for Caterham – new boxed 

This is over well £180 worth of bits… 

After £120 for the lot plus P&P 

Rather not split due to hassle of doing so Contact gsharville@hotmail.com for details (parts in Sussex)

Hi Roger

I have an injection fuel tank to sell. It has been removed from my car as I am fitting a custom tank from Axminster Panels.

The tank has a small patch on the bottom where a pin hole formed next to one of the welds for the baffle. Other than that it works perfectly. It is just the tank though, I am keeping the pump assembly and fuel gauge sender.

If interested I can send you some photos

Cheers

Nick

Hi Philip

I'll have a tank available in the next week or so.

Regards Nick

Hi Gary

Thanks for that. If it's just the bar on it's own I'll take it as I have the fittings.

YHM

Cheers

Nick

Does anyone have a 1/2" rear anti-roll bar that mounts to the lower chassis rail just above the A-frame mounts.

Cheers

Nick

I'll take this if it's still for sale. YHM as well.

Cheers

Nick

Just received my S3 grille, very nice, thanks.

Superb service from Richard

Cheers. Nick

Hi Stu

I'll take it. Will mail you later.

Cheers

Nick

Hi John

I have a set of TR1 adjustable runners that I was going to use but have now changed my mind. They are new, only been trial fitted to the seat but never bolted to the car.

Cheers

Nick

I'd be interested in the photos as well as I have a set of these to fit this winter

Cheers

Nick

Hi Rich

I'm interested in this. THM

Regards

Nick

Hi

I'll take the Shift-i shift lights

Regards

Nick

Paul

YHBM from Gary Sharville yesterday as he couldn't log in to BC

Cheers

Nick

Hi Danny

All above still available, what are you after?

Nick

I'm in Billingshurst, West Sussex but work near Gatwick if that helps. Will sort some photos out this evening

Ian. A-Frame is yours

Cheers

Nick

Edited by - Nick Pargiter on 20 Aug 2013 17:23:37

Clearing out a few bits from the garage that I no longer need

6x13 KN Minators, black centres & polished rims. Good condition but not perfect. £60 pr

6x1.9" 250lb springs. Probably only done 3000 miles. £25 pr

De-dion A-frame for post 96 chassis. New, still with packaging but a bit scratched where it's been in the garage. £30. SOLD

De-dion trailing arm. Re-powdercoated 6yrs ago, still in good condition. £15

K-series alternator, working fine when removed. £25

Bosch plug leads for EU2 K-series. £10 set

Locking Rover petrol filler cap (Jaguar BRG) and pipe (flap removed). £15

All above plus p&p at cost or GONADS

Cheers

Nick

Edited by - Nick Pargiter on 19 Aug 2013 19:58:47

Edited by - Nick Pargiter on 24 Aug 2013 18:03:28

Hi Guy

Yes please. YHM

Cheers

Nick

I have a 7" SLR race silencer that I was thinking of changing.

YHM

Cheers

Nick

De-dion A-Frame for 94 chassis so it's the shorter one that fits behind the rear bulkhead rather than under the floor

Anyone got a spare as CC are out of stock

Thanks

Nick

Interested in the driveshafts. YHM

Nick