Schnitzel

sorry for "weber carbs."

hi there, looking for a x-flow inlet manifold

Florian

Hallo Darren Kidney,

was brauchst Du einen Gewindeschneider oder einen Bolzen. Habe sowohl ein od. zwei Bolzen/Schraube, mit oder ohne Verlängerung. Mit Verlängerung ist damit Du das Bootcover noch öffnen kannst ohne, daß das Ersatzrad anliegt.

und den passenden Gewindeschneider dazu hätte ich auch

Florian

Julian,

about 10 years old only used 5 times (like new) with zip, car is imperial chassis, from 1988.

Florian

a nearly new hood with zip, incl. hood bag 190,-  plus p&p

i use this mirrors since 17 years or more, happy with them. Also with flared wings and Zetec longer then 19 years.

Back ground is, i go from carb. to tb. I get a used tank. So i need hole fuel pump assembly. 

looking for a complete fuel pump in tank kit, " dead or a live" for Rover K Series 

I know a LHD, X-flow 4 -speed live axle, here Rhein-Main Area.

Hallo Volker,

den richtigen Motor incl. Lüfterblatt sollte ich haben in meinem Fundus. 

My is a 1988 live axle Marina these a my springs

Faulkner springs  front
1.9" diameter
8" length
225 lbs spring rate

Faulkner springs  rear
1.9" diameter
11" length
140 lbs spring rate (recommend dedion) maybe 170lbs spring are more for live axle

In Name off Klaus, thank you for advice.

So no ARB @ rear.

behalf off Deutscher Se7ner

I have in my 7 no rear anti roll bar and will now retrofit one. The question is, what dimension would be the best?

Actually I have in front a wide track suspension with 9/16” anti roll bar and nitron shocks. Rear as well nitron shocks and, as I said, no anti roll bar. Should I chose a rear bar with 1/2” size or 9/16” size (like in front)?

My driving style is sporty, with very rare racetrack visits.

Chris, yes thats what i want, Great

looking for early Caterham wind screen frame and stanchion
 

I could over you both, FIA Rollbar Halfhood and Bootcover

Fia roll bar live axle incl. halfhood and boot cover,

hood and doors in perfect condition.

2 8x13 and 2 7x13 smoor roadster wheel PCD 95,25

Last year i bought a kit here in Deutschland, price was 160,- €.

400,- is really sporty.

ford part number is 6627000

i need the ford part number gasket waterrail to head, zetec silver top

thank for your help,  sorted

I need the caterham Cars part number for 1988 - 1989 5 speed dedion carpet set = bulkhead, tunnelcarpet, rhd a. lhd floor.

a hood for my 1987 caterham, non folding doors, pre high visibility.

yes for live axle incl. strut.

didn´t know a better place to buy parts, buy parts there since 1993.