Nigel R300

I think I am going to super glue my badge to the nosecone 

Their is another one on eBay selling for £50 

Suede brush?

you could save a lot of weight by only filling to the bottom of the dipstick 

I fitted mine under the dash next to the fuse box as I didn't want it to be seen 

SM25T  Ian James had a contact that could supply these at a reasonable price  you might want to get in touch with him .

It's a mixture of oil droplets ,water vapour and unburnt fuel 

Yes please I will take this 

thanks Nigel

PM sent

No I have,nt retired yet I am just off work for a while so am available for a mid week blat 

Mob No 07970239208 just give us a bit of notice in case Wife wants to go out .

Ditto

Ok ,Have a nice weekend and hope  you have some good weather in France

Cheers

Nigel

thanks for the replies I have order a Beofeng uv 5r  and have the starcom  digital via an eBay purchase 

Ian are you going to the plough on Tuesday if so could I have a look at your headset before I make a decision  also would appreciate advise regarding connecting it all together

Thanks

Nigel

can anyone recommend a reasonably priced pmr radio to use with a starcom 1 digital ?

I am also after a headset as the one I have is for a full face helmet 

Nigel

Have look on YouTube for k series cam belt change ,their is a video showing you how to change the cam belt I found it very helpful

Be careful when drilling the holes as it is metal and could tear quite easily ,I put it between two pieces of ply wood 

Peter 

on there web page there is a user guide showing you how to programme the shift lights it is done by pressing the button on the dash .

web address is ?WWW.aceserve.co.uk

technical support 

S B shift lights 

Nigel

Yes they are aces shift light .if you go to there web site  you can find the guide showing you how to set them up.

the control module on my car is sited on the bulkhead under the dash, drivers side .

Nigel

Their is a number on mine just in front of the roll bar on the drivers side 

it's a 2004 arch chassis

Yes please sent you a PM 

thanks

Nigel

How about £50 for the sump plus postage ?

Have you tried the leather seats ? If they are better you could see if anyone wants to swop

what is the best way to tilt the seat back I thought about putting some washers between the floor and the seat runners or is it better between the seat and runners

Nigel

The bracket was too wide to fit where the existing battery had been so I fitted the bracket in an upright position a small amount of cutting and filing was required and then riveted it in place and added a couple of small angle brackets as can be seen in the second picture 

the battery is held in place by the ally section across the back of the bracket fixed with two nuts and bolts.

I. Have the s3 chassis, I think if you have an sv you would have enough room to lay the battery down