jody391

Is this still for sale?

Jody.

With the speed bleeders you attach your bleed pipe, open the valve (this is a different closure to the one you would open doing it the old fashioned way)

And just pump the pedal, then when you are done close the valve, remove your bleed pipe and job done, onto the next.

Brakes bleed up nice and hard and no dramas needing any help.

I’ve just replaced my gasket with one from Dave (DVA) and removed the foam.

mines was like new but it’s only got 3000 miles on her so wasn’t clogged like yours!

I’ve just fitted these new brackets on my Imperial car.

Caterham told me they will fit fine and they did.

message sent mate.

What is it doing in the low speed corners?

I went the same route with my rear view mirror, so much more vision and it’s well out of the way.

S3 Aero screen wanted.

Cheers Jody.

Have you tried pressing the inertia switch? Mine triggered when dropping it down from the jack quite fast once.

I’ve tried there website but it seems very slow and tried linking me to gambling ads!?

any links or is there another place to see there products?

jody.

I would like to fit a lightweight flywheel but wondered whos was best and if anyone has any experience of ones to avoid?

Jody.

SOLD

I have just swapped these out for some Carbon seats.

great condition.

with seat runners if required.

£800

I have a set coming today so I will let you know.

Plenty of after market stuff on the Elise platform used here with great results.

I would think living life looking at the small print would mean a boring life!

Jody.

I have these on my F31 BMW, and work well.

Not as nice as the Stahlbus bleeders but ok.

Jody.

Check the T's and C's for what???

Thanks for confirming.

is there a top wishbone rose joint you can fit instead of the Caterham part for ease of adjustment?

Cheers, jody.

I should say I know it generally does but I wanted to check.

I know the Lotus platform well, but does the camber change with weight on the Caterham?

jody.

I’ve just got some AR1’s from track tyre.co.uk they were around £480 ish 

185/60/13 and 235/45/13 they are just alittle wider front and back than the R888’s I have on my other wheels they are 185/60/13 and 225/45/13

Nankang have there tyre widths measured at 189mm for the 185 

209mm for the 205

and 236mm for the 235

The two rears together, they look bigger in the image than they are.

I have tillets but want to see how the seating position is with std seats.

SOLD