-
Posts
196 -
Joined
-
Last visited
Content Type
Profiles
Forums
Blogs
Events
Blatmaps
Speed Championship Results
News
Website Help
Downloads
Gallery
Store
Posts posted by 2cv7
-
-
-
Hi Daz,
Thanks for the reply. I took the whole lot out this morning, but it's good to know it can be done.
-
Hi Colin,
Thanks for the reply and photos. The problem is the top tubes are very close to the top of the engine and I think that I would not be able to get enough space to get it off of the input shaft.
I was just wondering if anyone had any 1st hand experience. I’m guessing I’ll have to bite the bullet and take the whole lot out which is a faff.
-
Hi
I need to remove my engine to replace the bending clutch arm, and wondered if anyone has any experience of removing a k series engine from a metric chassis. I have taken it out a few times before with the gearbox attached but never on its own. Dry sump with bell tower.
Cheers in advance.
Elliott
-
Hi & Wonders.
I would be interested in the tank if it is still available.
BW.
Elliott
-
Take all the anti roll bars off and try that for a day or 2.
-
Pm sent.
-
Hi Julian. Does the filter fit Jenveys?
BW.
Elliott.
-
Hi,
Does anyone have a pair of CJ autos mobile axle stands they want to sell?
Thanks.
Elliott
-
Pm Sent.
-
Hi Jon,
Could I have the carb balancer please.
BW.
Elliott.
-
Have you tried selling it on Type 9 gearbox world on Facebook.
-
Could I have it if not already sold.
BW
Elliott.
-
Could i have them please. If not already sold.
-
Are there none at Burton Sport?
Or failing that have you tried asking McMillan Motorsport if they have one?
-
It was me.
Out late as I had to take my son to work.
I thought it might be you. You must have been out early!
-
Hi Mark.
Would you sell them for £50 posted?
BW.
Elliott
-
Hi Neil. Could I have it please.
BW, Elliott.
-
Hi Mark
Could you put me down for one if you have any left.
Bw, Elliott
-
I might be off to my friends in the Kootenays this summer.....
-
I am looking for one too.
There is one on FB marketplace in Bognor Regis if you are near there. Only £5:00 but they won't post. Been on for 3 weeks so you could make them an offer......
Elliott
-
Mine are
425mm long 25mm box section.
-
Hi Ralph,
I have a set of springs and shocks that I am not going to use if you are interested.
Elliott
-
Thanks Oily.
I will probably need to book you in for some work. Would you have any slots next winter? Probably Jan/Feb 2024 by the time I sort things out...
Elliott
Magnetron 9141 380 end plate
in TechTalk
Posted
Cheers Andrew.