Jump to content
Click here if you are having website access problems ×

redjohnuk

Account Inactive
  • Posts

    50
  • Joined

  • Last visited

Posts posted by redjohnuk

  1. For Sale ...NOW SOLD.

    Perfectly good head removed from 1800 K to make way for a DVA VVC special. Its complete with SS cams, Standard valves, Hydraulic Followers and the Inlet has been gas flowed. Was going to be used to build a spare engine but no longer required.

    PM me for more photos.

    £300.00 

    CylHead1.jpg.abd126820df7c40aaa272c8a7656fbc6.jpg

  2. Hi all

    A few bits left over after exporting the car. (Imperial 2003 S3 Roadsport)

    1 x Orange front ARB C/W ball ends. Wide Track.    £15

    Used pair Solid 1/2 doors (cut to fit around cage and drivers Side Impact bar.) I think they are fiber glass with Carbon surface finish.                                              £40

    SOLD.

    Lifline Extinguisher bottle. Well out of date but i believe servicable.        £10

    Set 4 standard rims 6" ( Minilite ) shod with Avon Turbo Speed CR28's  2 x 185/60/13.                      2 x 205/60/13.  The tyres have between 4-6 mm tread. Dated around 2013/14. Used on Track Days as a wet set on a couple of occasions. Wheels are tatty and one tyre has a nick in the side wall.                                                                      £70 for the rims Tyres FOC

    SOLD.

    2 x 20lt Jerry Cans                                                  £10 each

    Used Caterham Electric Oil Pressure gauge and Sender.     £15

    SOLD.

     If any of this is of interest please PM me for photos if required 

    Collection only please from South Oxfordshire. 

     

     

  3. Hi, I'm having to fit a new Speedo pickup to my 2003 roadsport. I've traced the 2 wires from the Speedo head, which I think are light green and red/blue,  I've done the earth mod. Can anyone tell me please which of the 3 wires on the sensor goes to which on the car. I assume that the black is the earth leaving the blue and brown.

    Thanks

    John

  4. Hi, I know it's a long shot but my electronic Speedo has decided to fail big time. Does any one have one they've swapped out. The car is going abroad permanently very soon so one in KPH would be good but essential.

    Speedy cables have quoted 8 plus weeks.

    Thanks.

  5. Hi all, I'm looking to get a pair of the older tall headlamp brackets for my 52 plate S3.  Any one that's changing to the newer low ones got a pair that I could buy. Also need a pair of headlamps, tatty is fine but lenses must be ok for MOT.

    Thanks

    John

  6. Hi, I have a pair of Goodyear Eagle Entura tyres taken off rims to make space for some ZZR's. 185/70/13 date code 5/18. They have at least 5mm tread depth and have hardly been used.

    If of any interest please pm me for phots

    collection only please from South Oxfordshire area.

    £20 the pair. 

  7. Hi, my spare S3 bonnet is no longer required. It's got some slight damage to the front OS corner but in general in fair condition. No bonnet clips fitted. Having to downsize due to house move.

    Photos available if of any interest.

    Collection only please from South Oxford area.

    Thanks.

  8. Hi,            Whilst clearing out the garage I’ve found the two lead ballast blocks taken from my Mega Grad ex race car. They weigh in the region of 24kg, they are wrapped in black tape and are drilled. Are they of any interest to anyone?

    Oiro £15. 

    Collection only please from High Wycombe preferably by Next Sunday as I’m moving house on Monday.

    Thanks

     

  9. Hi, the blade on my oldish freestyle front arb has decided to crack and unfortunately neither Simon Rogers nor Arch are able to supply just a blade replacement. Is there anyone near High Wycombe that’s got a red or green wide track arb they don’t need anymore. 

    Thanks. 

    John

  10. Hi all, I’m sure it’s all on here somewhere.. however, my Banner is just about dead, it’s a 1.6 K track only car and would like to have some info regarding what to fit next. Another banner is most likely the cheapest option.

    thanks

×
×
  • Create New...