gavingraysonr300

Thanks lads for all your info hes going to swerve that one cheers.

Hi all im asking for a friend who is looking at buying a Caterham hes seen a 2007 roadsport duratec example but has webber carburetors on it which im unsure about these must of been added at a later date why not just roller barrels whats the advantage hope someone can help ?

Hi all ive noticed recently my car is kanarooing more when i hit potholes or bumps its a r300 k with throttle bodies is it the cable or the throttle bodies out or anything else ?

Ive had the battery on trickle charge for a few weeks but must admit it struggled last time i started it after a long stint not being used but showing full charge on the charger. but it didnt just do continuous clicking and not turning over.

hi all i went to start the car after a few weeks and its just clicking not turning over, i did the Kseries click mod years ago and can't remember why you do it ? just wondering if the relay could have gone and needs a new one or the starter motor has gone ive checked all connections and all seams fine. Also where do you get the relay from just any accessory shop. thanks for any help.

Hi was wondering if anyone has bought any wheel cradles to move there car around the garage for more space and which ones are best suited for the Caterham ?

thanks Gavin.

Thanks Jonathan.

Thanks Chris.

Hi all had a road sport cage fitted but my door mirrors are binding on it so was thinking of fitting mirrors to windscreen stanchions to stop this or if anyone has any other ideas and what are the best mirrors to fit to the stanchions and how do they fit thanks Gav.

Hi all had a road sport cage fitted but my door mirrors are binding on it so was thinking of fitting mirrors to windscreen stanchions to stop this or if anyone has any other ideas and what are the best mirrors to fit to the stanchions and how do they fit thanks Gav.

Hi all had a road sport cage fitted but my door mirrors are binding on it so was thinking of fitting mirrors to windscreen stanchions to stop this or if anyone has any other ideas and what are the best mirrors to fit to the stanchions and how do they fit thanks Gav.

Hi all

I have a roll cage i want to fit to my car was going to do it myself but struggling for space at the moment so was wondering if anyone knows somewhere i can have it fitted and also have my suspension checked and set up at the same time and probably a service i live in lancashire but can trailer the car. also is the standard roll cages and bars powder coated satin black or gloss black.

thanks Gavin.

Just wondering if any one knows what the size and what torx socket i need to split my SLR wheels ready for powder coating and polishing ?

Thanks for the advise would you know what the torque settings are for a imperial car ? thanks Gavin.

Thanks so much for the information noticed in the article it said there is an important difference with the torque settings between metric and imperial my car is imperial would you know what the settings are ? thanks Gavin.

what size is the bolt going through at the front and i presume you need a locking nut on the inside ? also how easy is it to get the rear shocks out ? thanks Gavin.

Thanks for the advise car looks great by the way in both road and track.

Thanks Paul for the good advice Gavin.

Just wondering how easy it is to swap out a roll bar for a roll cage no holes at the front at the moment any advice is appreciated thanks.

Was wondering what was the best all round torque wrench to buy need to torque my hub nuts when refitting I’ve seen a teng which does 70 to 350, what’s the wheel nut torque setting cause this might come in for that to.

Think its been overtightened and yes deDion do you know the torque settings when putting back on seen 270nm seams alot

Ive got a stripped near side drive shaft so need a new one just wondering if anybody has got one lying around they want to sell. the hub nut end is stripped. need new nuts as well.

Hi can anyone tell me the size of the hub nut before I go and buy the wrong one 2003 car looks like 40mm

Cheers Stuart i don't have a master shut off key on my car but could disconnect my battery.

It will probably be about 9 to 10 months in the end, I’ve had it on a CTEK trickle charger so thought it would be fully charged. Managed to jump start it just wondering if it’s the battery or the charger at fault.