Silverback

Good question.

SV was a 2014 model...

Tonneau cover and cat bypass pipe now sold

6's fronts, 8's rear

Now sold

Sold

Now sold to Nick Chan

PM sent

(The glass is curved)

Both are shaped like this...

1. Timing bar (for sprints) £5

2.Behind seat headrest and mount £10

3. Softbits half hood for SV (does not come with lower buckles, the ones fitted to the car - am sure these can be sourced easily) £50

4. Luke ‘moustache’ crutch straps. Bagged and never fitted £10

All items in Bedfordshire.

Thanks, Matthew

No damage, minor cosmetic scrapes.

Does not come with mirrors (but holes drilled from where previous ones were fitted ).

Item is in Bedfordshire, looking at £100 for it.

Thanks, Matthew

Used a handful of times for sprints.

Attached with the relevant and all important sticker.

Item is in Bedfordshire and I am looking at £50 for it.

Thanks, Matthew

No cracks or damage but a few cosmetic scrapes.

Fitted with mirrors.

Missing one mounting popper.

I am in Bedfordshire, looking for £75 for the screen.

Thanks Matthew

Fitted with CR500 tyres that would likely need replacing.

I’m in Bedfordshire, happy for someone to collect or can meet at a reasonable distance inbetween.

Good condition (dirty at the moment) with a few small minor marks.

Looking in the region of £450.

Thanks Matthew

Model 125-2212

2000KG 4.0m x1.8m

I bought it new in March 2016 (£3.8K) from GT Towing and have covered less than 1,500 miles with it.

Bed is a little dirty but otherwise in fantastic condition, almost new.

Stored in garage when not in use.

Fitted with tyre rack, winch, long ramps (2.4m), ratchet straps (new style over wheel) and bulldog heavy duty hitch lock.

PM with a sensible offer if interested.

Thanks

Matthew

Will do.

Thanks

 I suspect I either ordered or was sent the wrong pattern type.

Morning all,

Just had my boot cover changed from the regular one to a low profile (no hoodsticks) version from Oxted. Not sure if they have changed the pattern recently, but the cover doesn't extend at the front to cover the rollcage mounting points or the little triangle shaped uprights. Is this correct?

Anyone have any clever options for covering these (now exposed) mounting points?

Thanks

Thanks for organising Derek, was great to have time to get to know the track layout. Ian - brilliant pictures!

New puppy is settling in well so have been given the greenlight for the 28th - see you there!

Mail sent to Michael re: seat.

Thanks

One of my friends took some photos while I was at Anglesey and from them I can see that my front right wheel is lifting a fair way off the ground when on the power at the banking (bookatrack banking corner).

Opinions on it being 'normal behaviour' given the camber of that corner or man maths needed on suspension tweaks/changes, particularly as I may be competing back there for sprinting at some point?

Matthew

Thanks everyone for comments and I agree with Rob, the high angle of camera on mine and relative lack of engine noise makes it look very uninspiring but it certainly felt anything but behind the wheel 

A huge thanks to everyone on my first ever sprint. I thoroughly enjoyed the day and while it felt a bit like first day at school, the paddock were more than helpful and patient with entertaining my questions and nervous chat.

Now to analyse those videos to see how to make up the time difference and try to get my calendar to align with some more rounds potentially.

Matthew

Thanks to all those who helped make my first sprint go well and all the advice on prep, lines etc.

I can see hesitation in my driving compared to other more experienced drivers and I don't seem to have quite the level of aggression (yet)...

My best (63.2) run in Class 4

https://youtu.be/i49V2p8AqSg

​I used Harry's laptimer with manual trigger points as there wasn't a certified track available so some of the timing/telemetry might be slightly out. Used my GoPro with the wrong back cover I think so more wind noise than anything else...