Anders Sweden Posted January 28, 2004 Share Posted January 28, 2004 Hi! I am about to fit my exhaust system but the side aluminium panel is not prepared with a hole for the four exiting exhaust pipes. Obviously it is very hard to find out where the hole needs to be exactley. Can anyone please help me? Measurments from bottom of frame, lower A-fram of suspension, top of frama and distance from rear exhaust mounting point in chassis (in front of rear wheel). Or maybe there is more logical referens points!? The exhaust is the 4-2-1 with stainless (BIG!) silencer. Thanks in advance! Anders Sweden Link to comment Share on other sites More sharing options...
Mole Posted January 28, 2004 Share Posted January 28, 2004 I have a template that Caterham sent me before I did the same thing - I'll see if I can take measurements off that if it would help ....... SV 52 CAT - moles fly - Link to comment Share on other sites More sharing options...
Paul McKenzie Posted January 28, 2004 Share Posted January 28, 2004 Anders, I would suggest you use a cardboard template prepared by someone with the same car, engine, exhaust who currently has the exhaust off the car. You probably need to let people have more details and I'm sure someone could make one for you. Paul Link to comment Share on other sites More sharing options...
Anders Sweden Posted January 28, 2004 Author Share Posted January 28, 2004 That would help me a lot! Thanks! Anders Link to comment Share on other sites More sharing options...
Mole Posted January 28, 2004 Share Posted January 28, 2004 Anders - I've retrieved the template from Mole's motor house to take measurements, but it might be easier for me to just trace it onto a large sheet of paper and post it to you if you e-mail me your address. SV 52 CAT - moles fly - Link to comment Share on other sites More sharing options...
Anders Sweden Posted January 29, 2004 Author Share Posted January 29, 2004 Hi! Thanks for your help! It would help me alot. What is your e-mail adress? Kind Regards Anders Link to comment Share on other sites More sharing options...
Mole Posted January 29, 2004 Share Posted January 29, 2004 Just use the e-mail icon on one of my postings above ..... SV 52 CAT - moles fly - Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now