Drumster Posted November 1, 2015 Share Posted November 1, 2015 Anybody upgrade to a Tillett and have one gathering dust in the garage? Link to comment Share on other sites More sharing options...
Area Representative Nick Chan Posted November 4, 2015 Area Representative Share Posted November 4, 2015 Hi Chris, how tidy do they have to be? I have a pair in the garage rafters that came out of long stored car but had a bit of mouse damage... Holes have been taped up and mainly sit under harnesses so not massively obvious. If of interest I'll get you some photos. They are complete with headrests and may even have their runners but can't quite remembercheersNickps really glad to see you are rebuilding the car after such a bad accident. Hope Maggie is getting better Link to comment Share on other sites More sharing options...
Drumster Posted November 4, 2015 Author Share Posted November 4, 2015 Hi Nick,Ideally pretty tidy as I'm thinking of replacing my original cloth passenger with a decent leather one for Maggie i.e. something that doesn't soak up the water when touring in the rain! Link to comment Share on other sites More sharing options...
johnpbransfield Posted November 5, 2015 Share Posted November 5, 2015 Hi Chris,Not leather seats but I do have headlight brackets and wing stays from a 2009 metric chassis which you are very welcome to have FOC (just postage costs) The headlight brackets are in vgc but the wing stays will need a coat of paint where they are drilled through. Link to comment Share on other sites More sharing options...
Drumster Posted November 5, 2015 Author Share Posted November 5, 2015 Hi John,That's very kind thanks, but I already have a spare pair of wings stays and i just need a LHS 96-98 headlight bracket Link to comment Share on other sites More sharing options...
johnpbransfield Posted November 5, 2015 Share Posted November 5, 2015 No worries Chris, hope you get sorted OK. Link to comment Share on other sites More sharing options...
Area Representative manningpaul Posted November 6, 2015 Area Representative Share Posted November 6, 2015 I have one which I was going to change over when my current drivers side got rather tatty.I am down in Wilts so not quite sure how we would arrange transport should you be interested?regards Paul. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now