madmaninshed Posted October 20, 2013 Share Posted October 20, 2013 Hi, We are about to balance the twin Webbers on my Blydentein 1600 VX with Kent cam, and we want to check the timing when we do it. Does anyone know the timing information please for this engine with porting, Kent cam and twin Webbers? If not, is there somewhere I can find out please? Thanks for any help. cheers, Paul. Link to comment Share on other sites More sharing options...
Klunk Posted October 20, 2013 Share Posted October 20, 2013 Hi , If you can find the cam identification number (e.g. AST28) then you can look up the timing settings here on the Kent Cams website. Regards, Giles Link to comment Share on other sites More sharing options...
madmaninshed Posted October 20, 2013 Author Share Posted October 20, 2013 Thanks Giles, I'll see if I can find it. Brilliant!!! Link to comment Share on other sites More sharing options...
Klunk Posted October 20, 2013 Share Posted October 20, 2013 I think if you remove the dizzy, it's stamped on the end of the camshaft. Regards, Giles Link to comment Share on other sites More sharing options...
madmaninshed Posted October 20, 2013 Author Share Posted October 20, 2013 thanks again Giles, we'll have a look before we start. Cheers, Paul. Link to comment Share on other sites More sharing options...
madmaninshed Posted October 20, 2013 Author Share Posted October 20, 2013 Hi chaps, really sorry, it just shows my ignorance.....it is the ignition timing we are after and not the valve timing. sorry to ask again...... Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now