Rollbar mounted wheel rack

[PhilKing]

Hi, not sure if this is Tech Talk, but does anyone have plans, drawings for fabricating a roll bar mounted wheel rack.

 

I have posted in wanted in case someone is selling one, but have contact that could make one if I can provide measurements and spec.

 

If anyone can help much appreciated.

 

Thanks

 

Phil

[Graham Perry]

Its been done several times in the past. There should be something in the archive

[DaveMorris]

Phil,

 

blatmail me your contact and I will send some files.

 

Also have some bits which may be helpful (depending on what type of roll bar you have),

 

Dave

[PhilKing]

Hi Dave

 

THM, thanks

 

Phil

[Myles]

here's the one I had made many years ago. Might 'soon' be available for sale as it is stored in the lockup of my grandmother who is unlikely to survive the year... ☹️

 

Anyway - 'my' design is slightly different to most other peoples in that the wheels stack vertically rather than side-by-side. The idea was that you don't always want to carry a full set - and they'd be more stable stacked like this.

 

Works a treat - except that for version 2 (if I were ever to take this further), I'd do a bit more research into overall unladen tyre diameters as I can see that taller-profile tyres / larger diameter wheels might need a bit more space than we bargained on when I built this one!!!)

 

 

[PhilKing]

Hi Myles

 

Sorry about your grandmother always a tough time.

 

The set up looks good to me, if you are looking to sell would be interested, but I was looking to sort this for a few track days this summer. I am using 13" wheels so assume it would be fine for that size.

 

Let me know, no worries if difficult, but if you have plans on dimensions that would be great.

 

Cheers

 

Phil