pugwash Posted May 8, 2012 Share Posted May 8, 2012 New build. Engine started for the first time yesterday. Sigma engined supersport. Came to run the wiper motor tonight with no arms to establish park position. Spindles make two sweeps and blow the fuse. Change fuse and exactly the same happens - blow second fuse. No more fuses left but I can guess what would happen if I carry on. Interestingly as the spindles do their sweep the speedo blips to about 15 mph briefly. the engine is switched off, this is just off the ignition position. Anything obvious to check? Mark. Link to comment Share on other sites More sharing options...
Ian R Posted May 10, 2012 Share Posted May 10, 2012 Check the earth is good and firm. Check arms underneath are not catching live feed to unit? Remove from dash and check on bench to be sure, wire up to battery directly, use a fused feed too! Hope that helps. Link to comment Share on other sites More sharing options...
Mad Hatter Posted May 10, 2012 Share Posted May 10, 2012 Put the aero on job done Link to comment Share on other sites More sharing options...
pugwash Posted May 11, 2012 Author Share Posted May 11, 2012 Turned out to be a dodgy switch. I do like Hell Boys comment though. I do have an aero but not fitted at the moment - perhaps the car is trying to tell me something! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now