James7 Posted January 7, 2012 Share Posted January 7, 2012 I’ve removed the original non adjustable one by unbolting the clamps and pulling out the ball joints. The standard one has clamps like these with rubber bushes inside. I don’t think these will transfer onto the adjustable ARB and certainly won’t slide over the ‘blade’ side. Should I be using some type of 2 part clamp and bush that will split in half / where can I get the necessary items from? What sort of grease should I use on the ball joints on re-assembly – would one of these be suitable? Thanks James Link to comment Share on other sites More sharing options...
Paul McKenzie Posted January 7, 2012 Share Posted January 7, 2012 This here is what you need. Any general purpose grease will do Paul Link to comment Share on other sites More sharing options...
James7 Posted January 7, 2012 Author Share Posted January 7, 2012 Ok, will order a couple of those then thanks. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now