marshall cook Posted January 3, 2011 Share Posted January 3, 2011 Anybody happen to know the thread size of the OP sending unit on a twink? My VDO unit "took a dump" . MartyGator Link to comment Share on other sites More sharing options...
Bob_Rich Posted January 3, 2011 Share Posted January 3, 2011 Hi I think it is one of two possibilities 1/8"NPT which is 27threads per inch (TPI) and the OD of the pipe or bush would be 0.405" diameter --this I think is the most likely. Could be 1/4"NPT which is 18tpi and0.54" for the OD. a check with a caliper should confirm which one it is. hope this helps but would check!! best of luck Bob Link to comment Share on other sites More sharing options...
marshall cook Posted January 3, 2011 Author Share Posted January 3, 2011 Thanks Bob! I am getting .51" (13mm) on the outer bush? MartyGator Link to comment Share on other sites More sharing options...
marshall cook Posted January 3, 2011 Author Share Posted January 3, 2011 BTW I ma measuring the outside of the threads..... MartyGator Link to comment Share on other sites More sharing options...
marshall cook Posted January 9, 2011 Author Share Posted January 9, 2011 Turns out to be 1/4 BSP :-) MartyGator Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now