johnny Posted December 17, 2007 Share Posted December 17, 2007 nitrons for vx with wide-track Link to comment Share on other sites More sharing options...
Irrelevant Posted December 17, 2007 Share Posted December 17, 2007 Worth a try . . . You'll need to be a bit more specific though. What year front wishbone mounts do you have - i.e. pre/post 97ish change? Does your dedion have both sets of damper mounts, or just the top/bottom? You want one way or 2 way Nitrons? Link to comment Share on other sites More sharing options...
johnny Posted December 17, 2007 Author Share Posted December 17, 2007 the rear shock bolt on at present go through dedion its a 97 hpc not sure what you mean reguarding the front Link to comment Share on other sites More sharing options...
Irrelevant Posted December 18, 2007 Share Posted December 18, 2007 Re front, you probably have the newest front end where the upper damper bolt is 5/16 and does not also locate the rear of the upper wishbone. Check though as you have the old dedion mounts and may have a chassis that was left sitting about before being registered - i.e. it may have the old front end as well. Even with adjustable platforms, you want to get the correct length dampers for maximum travel. Link to comment Share on other sites More sharing options...
johnny Posted January 14, 2008 Author Share Posted January 14, 2008 btt Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now