Martyn Heesom Posted March 23, 2007 Share Posted March 23, 2007 I am after the following:- 120 main jets 170 air corrector 35/40 pump jet Thanks Martyn Link to comment Share on other sites More sharing options...
Westfield Posted March 23, 2007 Share Posted March 23, 2007 Martin No jets but I always used to drill the old ones to the new size… a 120 main has a 1.2mm hole and a 170 air has a 1.7mm hole. They drill out easily by hand using the drill in a pin vice, just twist the drill through! My local tool shop has a full size of drills for around £1 each or you can get a set on Ebay for around £4 1997 HPC Link to comment Share on other sites More sharing options...
Martyn Heesom Posted March 24, 2007 Author Share Posted March 24, 2007 Tony, Thanks for your reply - the jets I am currently after are smaller than those I already have! I will look for a drill set if I need to enlarge any. Martyn Link to comment Share on other sites More sharing options...
Westfield Posted March 24, 2007 Share Posted March 24, 2007 Ahhhhhhhhhhh Its quite difficult to drill a smaller hole than the one already there! 😬 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now