SOLD - Carbon Sill Protectors for S3

[Shortshift]

These were SV/CSR protectors that were cut down in length (to fit a cage) and are therefore too short to refit to an SV or CSR.  However, they just need reducing in length (by around 35/40mm) to make them perfect for a standard S3 car where the required length is 415mm.

One side is pretty much in perfect condition, the other has a few cracks including some near the ends which are quite minor and, anyway, will mostly be removed when the part is cut to S3 length.  I've taken a photo of one end; it's similar at the other.  The pre-drilled holes might line up with your existing side trim fixings but, if not, they are hidden behind the side trim - you just drill new holes where required.

Allowing for the slight cracking, I'm thinking of £55 plus postage for the pair (over £160 new!).

James

[Shortshift]

SOLD

James