Jacking up a Seven

Using a Scissor or Bottle Jack (eg to change a wheel)


Front: Under the lower wishbone, about half way acrosss. This has the effect of just compressing the spring and damper and gives enough clearance to get the wheel off. Loosen the wheel nuts before using the jack, and re-tighten once the tyre is on the ground.


Rear: Under the trailing arm/A frame bush at the front of the wheelarch.


Sorry, but the full text of this page is only available to users with a membership.

If you are already a full member please log in to your account and ensure your membership details are correctly entered into your user account.
If you have registered on the website, but have not yet paid for full membership - you can do that here.