Simon.Rogers1 Posted March 18, 2006 Posted March 18, 2006 Does anyone have a box out of the car at the moment that they can measure the length of the nose on the box from the face of the gerabox. I think I need the measurement to be from a K series only. It would seem the bellhousing size varies by 20mm on the VX housing. So distance from front face of box to end of nosing please.
Jeff S Posted March 19, 2006 Posted March 19, 2006 Simon, Ive got a 5speed box on the bench at the moment out of my k series The front shaft protrudes 195mm from the face on the box that the bell housing bolts to. Hope this is of some help Jeff
Simon.Rogers1 Posted March 19, 2006 Author Posted March 19, 2006 Thanks Jeff but that sounds like you have measured the length including the input shaft. What is the length of the nose that the shaft sits inside that the clutch release bearing sits on. From the same place. Many thanks again. Simon
Jeff S Posted March 19, 2006 Posted March 19, 2006 Simon, Sorry for delay been out visiting relatives. Nose length is 128mm Jeff
Simon.Rogers1 Posted March 20, 2006 Author Posted March 20, 2006 Jeff/Paul Many many many thanks *thumbup* *thumbup* That makes sense out of many of my calculations.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now