Dave McCulloch Posted December 17, 2005 Share Posted December 17, 2005 My current cam cover is drilled to take the apollo oil return pipe. As I'm converting to dry sump and hence ditching the apollo, I need to replace the cam cover. Anyone got one knocking around? Thanks Dave Link to comment Share on other sites More sharing options...
mav Posted December 18, 2005 Share Posted December 18, 2005 Just block off the outlet... Link to comment Share on other sites More sharing options...
Dave McCulloch Posted December 18, 2005 Author Share Posted December 18, 2005 Mav I could just use a short bolt and a washer to seal it - I'd just be happier knowing there isn't a nut there that could vibrate loose and get where it shouldn't. Might consider as plan B though. Dave Link to comment Share on other sites More sharing options...
Jason Plato Posted December 19, 2005 Share Posted December 19, 2005 Jason at Hellier hasd soem cheap ones on the shelf - i had one myself the other week C7 TOP Powered by Hellier Performance 😬 South Wales AO Link to comment Share on other sites More sharing options...
Dave McCulloch Posted December 19, 2005 Author Share Posted December 19, 2005 Cheers Dave - I'll talk to him at the same time as I get the dry sump drain plate. Dave Link to comment Share on other sites More sharing options...
Mark Gregory Posted December 24, 2005 Share Posted December 24, 2005 Dave: I have an EU3 cam cover without the Apollo drilling which I'd like to swap for one with, if you're interested. Mark Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now