Big Brother Posted June 19, 2004 Share Posted June 19, 2004 Bit of a long shot but does anyong know the thread size for the hole the reversing light switch screws into on a type 9 gearbox Alternatively, anyong got an old reversing switch they dont want. It doesn't have to work - just plug the hole Steve Se7en-Up! Link to comment Share on other sites More sharing options...
Big Brother Posted June 19, 2004 Author Share Posted June 19, 2004 for future reference its 14mm (1.5mm) Steve Se7en-Up! Link to comment Share on other sites More sharing options...
John Vine Posted June 21, 2004 Share Posted June 21, 2004 Se7en-Up!, If you're still looking for a switch, I've got one you can have. It has one missing terminal pin (I broke it off while lifting the engine after my latest CRB failure!). JV Link to comment Share on other sites More sharing options...
Big Brother Posted June 21, 2004 Author Share Posted June 21, 2004 John, You should have mail (via BC) Steve Se7en-Up! Link to comment Share on other sites More sharing options...
John Vine Posted June 22, 2004 Share Posted June 22, 2004 Steve, It's in the post (but you'll need a sealing washer). JV Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now