The Gimp Posted January 22, 2004 Share Posted January 22, 2004 Morning, car is going to have the Geo CHECKED but i am struggling to get the factory settings out of Caterham Has anyone got the Standard set up for an R300 please Front and Rear Camber, Castor and Toe could i have them in Degrees and Minutes please and not Millimetres Lov Yoo Link to comment Share on other sites More sharing options...
Graham Sewell Posted January 22, 2004 Share Posted January 22, 2004 From the online assembly guide and search for camber gives: Front ----- Tracking 0 degrees 20 minutes +/- 10 minutes toe in Camber 1 degree 20 minutes +/- 15 minutes (Negative) Caster 4 degrees +/- 1 degree (with 20 minutes variation left to right) Rear Camber 1 degree 30 minutes +/- 15 minutes (Negative) Low tech luddite - xflow and proud! Link to comment Share on other sites More sharing options...
The Gimp Posted January 22, 2004 Author Share Posted January 22, 2004 Thank You Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now