Miker7 Posted May 14 Share Posted May 14 I need a new number plate. I'd like to replace like for like or a little smaller. The current rigid plastic plate is 440mm wide. From reading the gov website i think i can go as small as 420mm and be legal. Are their any number plate suppliers that you'd recommend? I've done lots of googling and they seem to claim "smaller" but not say how small or say smaller is around 470mm. Is their any reason if i could get the BS code and their post code onto the middle of the plate I couldn't just trim one down with a hacksaw and file? (nb cheap is also good, i'm tighter than dogs bum in a vets). Link to comment Share on other sites More sharing options...
Jonathan Kay Posted May 14 Share Posted May 14 Jonathan Link to comment Share on other sites More sharing options...
Miker7 Posted May 14 Author Share Posted May 14 My searches all turned up stick on plates - feel like a right numpty now. Thank you. Link to comment Share on other sites More sharing options...
Miker7 Posted May 14 Author Share Posted May 14 Ok, they all seem to be full of show (illegal) plates. I'm specifically after a legal plate that is as small as legally possible which i've calculated to be around 420mm or a little larger like my current plate at 440mm (7 digit current style number plate) Link to comment Share on other sites More sharing options...
K7 VCT Posted May 14 Share Posted May 14 This is legal spacing between letters and numbers, but trimmed either side to legal dimensions. Been on the car since 2016 and mot ok and police ok 1 Link to comment Share on other sites More sharing options...
lapsedtheorist Posted May 14 Share Posted May 14 proplates have a wide range of sizes and whilst they mainly do show plates they do road legal ones too - when I raised an enquiry regarding dimensions they were really helpful and confirmed for me that fully road legal lettering for my plate fitted on a smaller width than standard, so maybe give them a try? Link to comment Share on other sites More sharing options...
Mark Rowe Posted May 14 Share Posted May 14 I used https://www.platesforcars.co.uk/ and purchased their 330mm x 89mm selecting UK Legal and Legal Details Link to comment Share on other sites More sharing options...
Miker7 Posted May 14 Author Share Posted May 14 7 minutes ago, Mark Rowe said: I used https://www.platesforcars.co.uk/ and purchased their 330mm x 89mm selecting UK Legal and Legal Details Thats interesting as legally the plate letter needs to be 79mm tall and the gap above and below the letter is 11mm making the minimum height 101mm. INF104 (publishing.service.gov.uk) Appreciate i'm being overly cautious, i just want a plate thats approx. the width of the original caterham plate i'm taking off. Link to comment Share on other sites More sharing options...
Mark Rowe Posted May 14 Share Posted May 14 2 minutes ago, Miker7 said: Thats interesting as legally the plate letter needs to be 79mm tall and the gap above and below the letter is 11mm making the minimum height 101mm. INF104 (publishing.service.gov.uk) Appreciate i'm being overly cautious, i just want a plate thats approx. the width of the original caterham plate i'm taking off. I understand your concern - I have seen some 7's without any front number plates. Link to comment Share on other sites More sharing options...
W33SVN Posted May 14 Share Posted May 14 I used jdmplates.co.uk for my bike, they made it as physically small as the legislation allows, including borders. They do cars too. Link to comment Share on other sites More sharing options...
BigCol Posted May 14 Share Posted May 14 Mine is a normal plate I cut down to the legal minimum 11mm borders… which does mean it now lacks the BS number that would’ve been in the bottom right-hand corner but does have the plate-maker’s details (a subtle “my other car’s a…”!) 1 1 Link to comment Share on other sites More sharing options...
olly Posted May 17 Share Posted May 17 I bought a short plate from JDM Plates (invoiced as “Small, Legal, Printed Number Plates For All Vehicles - White (Front), 7 Dig Plate With 1”). Here’s a before/after compared to my (damaged) original Caterham plate: Link to comment Share on other sites More sharing options...
W33SVN Posted May 17 Share Posted May 17 Looks great, and no worries about being stopped Link to comment Share on other sites More sharing options...
Miker7 Posted May 17 Author Share Posted May 17 I've ordered one which in theory is 420mm wide and should be the legal minimum for my plate, using the legal font and having the legalese in the bottom right corner. Slightly concerned they've not asked to see any evidence that I own the plate I'm buying. Photos will be incoming for once its delivered. Link to comment Share on other sites More sharing options...
Jonathan Kay Posted May 17 Share Posted May 17 3 hours ago, olly said: I bought a short plate from JDM Plates (invoiced as “Small, Legal, Printed Number Plates For All Vehicles - White (Front), 7 Dig Plate With 1”). Here’s a before/after compared to my (damaged) original Caterham plate: Yes, much prettier without the excess border. Jonathan Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now